The Structure Of The Spark Plug

Mar 05, 2025

Leave a message

1. Steel shell: The lower part of the steel shell is fine threaded, used to fit the spark plug hole of the cylinder head, and there is an outer hexagonal nut on the upper part, used to install the spark plug sleeve to tighten or unscrew the spark plug .
2. The metal rod is the central electrode. The lower end of the metal rod is in contact with the upper end of the central electrode through a conductor glass body, and the upper end of the metal rod is equipped with wiring nuts .
3. There is a high alumina ceramic insulator between the steel shell and the central electrode to insulate the central electrode when powered on .
4. The lowermost part of the steel shell is equipped with curved side electrodes .
5. There is a copper washer in the middle of the outside of the steel shell .

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!