The function of a car spark plug is to introduce the high voltage generated by the ignition coil into the combustion chamber of the engine, and through its own gap, it produces a spark discharge to ignite the combustible mixture.
I. Requirements for Automotive Spark Plugs
1.Car Spark Plugs of automobiles should be able to withstand the effect of high voltage impact electricity, and their insulators should ensure good insulation performance under the action of 30,000V high voltage.
2. The temperature of the combustion gas in the engine cylinder differs significantly from that of the fresh mixture entering the cylinder. The spark plug must be able to withstand such drastic temperature changes and maintain a certain temperature, without causing local overheating or overcooling.
3.Car spark plugs of automobiles should be able to withstand the huge impact force generated by the combustion of the mixture. Therefore, car spark plugs need to have sufficient mechanical strength.
4. During operation, car spark plugs are subject to the corrosive effect of various active gases in the combustion products. Therefore, it is required that car spark plugs be made of refractory and corrosion-resistant materials.

II. Factors Affecting Spark Jumping of Automotive Spark Plugs
1.The shape of the electrode of car spark plugs has a significant impact on its discharge performance. Generally, electrodes with relatively sharp edges and corners are more prone to discharge. If the electrode is spherical in shape, discharge is the most difficult.
2. The influence of the electrode clearance of car spark plugs. Generally, the larger the electrode gap of a spark plug is, the higher the discharge voltage required. To ensure reliable ignition of the engine under any circumstances, the gap of the spark plugs is 0.6 to 0.8mm.
3. The influence of cylinder compression pressure. The greater the compression pressure of the cylinder, the more difficult the spark discharge will be, and the higher the required voltage will be.
4. The influence of electrode temperature. The higher the temperature of the spark plug electrode, the lower the required voltage.
Iii. The Influence of Clearance on the Engine
The larger the gap of car spark plugs in a car, the stronger the spark from the spark. The stronger the spark, the easier the fuel in the cylinder burns and burns better, the easier the engine starts, and the fuel can also be saved. However, the larger the gap, the higher the voltage required for a spark to trip. Additionally, the greater the compression ratio of the cylinder, the higher the voltage needed for a spark to trip. Therefore, the most appropriate car spark plugs gap must be set based on the voltage that the ignition system can supply and the pressure condition of the cylinder.
If the gap is too large, a higher ignition voltage is required to enable the spark plug to cross this gap. If the gap is not adjusted too high in accordance with the original factory's regulations, it may cause the spark plug to trip, making ignition difficult, resulting in the engine being hard to start, weak acceleration, inability to run fast, and excessive fuel consumption.
If the gap is too small, it may cause no ignition, premature ignition, deflagration, noise during operation and poor exhaust.
Self-cleaning temperature (heat value and heat dissipation performance)
To ensure the spark plug works well, it must be kept within an appropriate temperature range. The lower limit of this appropriate temperature range is called the self-cleaning temperature of the spark plug, which is approximately 450 degrees Celsius. If the spark plug operates at a temperature lower than this, the carbon deposits produced by incomplete fuel combustion will deposit on the surface of the ceramic insulator of the spark plug, causing leakage of the spark plug. When the carbon deposit is severe, it will cause the spark plug to fail to ignite. Above this temperature, the deposited carbon deposits will be burned off. Therefore, this temperature is called the self-cleaning temperature. The upper limit of the temperature range is called the pre-ignition temperature, which is approximately 950 degrees Celsius. If the temperature of the central electrode of the spark plug exceeds this temperature, the spark plug can ignite the mixture without sparking. This situation is called premature ignition. Premature combustion can lead to a decrease in the engine's output power and even cause the piston to burn and melt at the top. Therefore, the temperature of the spark plug must be below 950 degrees Celsius. The normal operating temperature range of the spark plug is 450 to 950 degrees Celsius.

Iv. Types of Spark Plugs
The key part of a spark plug is the insulator. If the insulator fails to function, high voltage will "take a shortcut" without grounding the two poles, resulting in no spark. Therefore, the insulator must have good mechanical properties and the ability to withstand high voltage, high temperature, and chemical corrosion. Ordinary spark plugs are mostly made of ceramics based on aluminum oxide.
Car Spark plugs are divided into two types: hot type and cold type. The two of them reflect the thermal characteristic performance of the spark plug. Spark plugs need an appropriate temperature to function well and no carbon deposits to function properly. When the temperature of the insulator is maintained at 500 to 600 degrees Celsius, the oil droplets that fall on the insulator can be burned off immediately without forming carbon deposits. If the temperature is higher than this, it will catch fire prematurely; if it is lower than this temperature, carbon deposits will form. The temperature varies on different engines. This problem can be solved by using the length of the insulator skirt.
Cold type (high calorific value) : The skirt is short, the heating area is small, the heat transfer path is short, and heat dissipation is easy, thus the working temperature is low. It is suitable for high-speed, high-power and high-compression ratio engines with high cylinder working temperature.
Hot type (low calorific value) : The skirt is long, the heating area is large, the heat transfer path is long, and heat dissipation is difficult, thus the working temperature is high. It is suitable for engines with low speed, low power and low compression ratio, and the working temperature of the cylinder is low.
For those between the two, spark plugs with medium heat value should be adopted. When replacing spark plugs, the model specified by the manufacturer should be selected to ensure that the heat value matches.
Car Spark plugs with a higher calorific value respond quickly and are more suitable for the stop-and-go traffic conditions in urban areas. However, when used in high temperatures, they are prone to causing the engine to overheat. Conversely, spark plugs with lower calorific value do not respond as quickly as those with higher calorific value during driving and stopping. However, when a car is driven at high speed for a long time, spark plugs with lower calorific value will perform better.
1, 2 and 3 are low-calorific value spark plugs, namely hot-type spark plugs (prone to heat up);
4, 5 and 6 are medium-sized spark plugs;
7 and above are high heat value spark plugs (prone to cold)
Although the spark plugs of a car are small, they are indispensable key components for the normal operation of the vehicle. Understanding its function and importance, and regularly inspecting and maintaining it, can ensure that our beloved car always maintains strong power and good performance, and travels smoothly without worries!


|
Product model |
Product size |
Material |
Installation torque |
Applicable vehicle models |
|
VDCPR7E 503 |
Thread diameter:12mm Thread length:19mm Wrench size:16mm |
Nickel-copper |
15-20N·m |
B12 engine: Changhe Suzuki Beidouxing 1.1L/1.4L, Langdi 1.2L/1.4L, Paxi 1.4L, Jianghuai Yueyue 1.0L, Brilliance Jinbei Zhishang 1.5L, Hafei Lubao 1.1L/1.3L, New Sail 1.2L/1.4L, Lechi 1.2L, Aveo 1.2L, New Le Feng 1.2L, Aveo 1.4L, Bao Jun630 1.5L, Wuling Zhiguang 1.0L/1.1L/1.2L, Wuling Rongguang 1.2L, Wuling Hongtu 1.1L/1.2L, Nanjing Fiat 1.3L, FAW Jilin Senya 1.3L/1.5L, Changan Benben 1.0L |
|
VLFR6A 504 |
Thread diameter:12mm Thread length:26.5mm Wrench size:16mm |
Nickel-copper |
25-30N·m |
Dongfeng Peugeot 307, Peugeot 206, Peugeot 207, Peugeot 408, Fukang 1.6L, Mitsubishi AsX 1.6L, BYD F0 1.0L, S6 2.4L, Beijing Automotive 1.3L/1.5L, Great Wall Tengyi V802.0L/2.4L, Dongfeng Fengjing Yi 1.5L/1.6L, Fengshen H30/S30 1.6L, Geely Panda 1.0L, Global Eagle GX7 2.0L/2.4L, Zhonghua H530 1.5T/1.6L, Zhonghua H320/H230 1.5L, Zhonghua V5 1.6L, Zotye Z200 1.5L/Z300 1.5L |
|
IAPR6FS 654 |
Thread diameter:18mm Thread length:10.9mm Wrench size:20.8mm |
Iridium |
20-30N·m |
Dongfeng 491 Delica |
|
ILTR5A-13G 655 |
Thread diameter:14mm Thread length:25mm Wrench size:16mm |
Iridium |
10-20N·m |
New Mazda 6 2.3L/2.0L, CX-7 2.5L, MX-5 2.0L, Mazda 5 2.0L, Atenza 2.5L/2.0L, Mazda 8 2.3L/2.5L, Changan Mazda 3 2.0L, Aveo 2.0L, Changan Ford Fiesta 1.6L, Mondeo Zhi Sheng 2.3L, Maxus 2.3L |
|
PILZKFR8D7S 638 |
Thread diameter:12mm Thread length:26.5mm Wrench size:14mm |
Iridium-platinum double |
15-20N·m |
New Mercedes-Benz A180/B2001.6T, C200/A260/B260 2.0T |
|
PILZTR6A8G 639 |
Thread diameter:14mm Thread length:25mm Wrench size:16mm |
Iridium-platinum double |
10-20N·m |
Applicable to: Ford Fiesta ST1.6T (2013 model), Kuga 1.6T, and Volvo B4164T engines Applicable to: VOLVO S60II 1.6T, S80II 1.6T, V40II 1.6T, V60 1.6T, V70III 1.6T |
|
PIFR5N10 642 |
Thread diameter:14mm Thread length:19mm Wrench size:16mm |
Iridium-platinum double |
25-30N·m |
Applicable to: Land Rover Discovery 4.4L, Range Rover 4.2L/4.4L, Jaguar XF 4.2L, JF 4.2L, S-Type4.2L |
|
PITR55-1IX 643 |
Iridium-platinum double |
Iridium-platinum double |
10-20N·m |
Applicable to: Land Rover Series Discovery 3 4.0L, Discovery 4 4.0L |
|
PILKAR7L11 661 |
Iridium-platinum double |
Iridium-platinum double |
15-20N·m |
Mazda Atenza 2.0L/2.5L, CX-4 2.0L/2.5L, CX-5 2.0L/2.5L, Axela 1.5L/2.0L, Imported Mazda Atenza 2.0L(2013 -) |
|
PILNAR8B7G 665 |
Thread diameter:12mm Thread length:26.5mm Wrench size:164mm |
Iridium-platinum double |
10-20N·m |
Buick New Lacrosse 1.5T, Envision 1.5T, New Cruze 1.4T |
Hot Tags: car spark plugs, China car spark plugs manufacturers, suppliers, factory, Auto Gas Engine Iridium Spark Plugs, spark plugs, auto spark plugs, Truck Spark Plugs, Iridium Spark Plugs, Double Platinum Spark Plugs

