Standard: GB/T7825-2017
Certification: IAIF 16949:2016
Yamaha PW50 spark plug, recommended use of BPR6ES
- Heat value: 6
- Thread length: 19mm
- Thread diameter: 14mm
- Wrench size: 20.8mm
- Installation torque: 25-30·m (be sure to use a torque wrench, overtightening may damage the cylinder head threads)


Yamaha PW50 Spark Plug Model Interpretation (BPR6ES)
B: Thread diameter14mm
P: Projecting type insulator, better performance
R: Resistor type, used to suppress radio interference
6: Heat value (medium. This value is important, the larger the number, the "colder" the spark plug (faster cooling), the smaller the number, the "hotter" (s cooling). PW50 uses a medium heat value spark plug which is just right.
E: Thread length 19mm
S: Standard type electrodeYamaha
PW50 Spark Plug, Common Issues and Troubleshooting
Q: PW50 starts difficultly or won't start, could it be related to spark plug?
A: It's very much related. This is the most common fault point.
· Solution:
Remove the spark plug check if the electrode is soaked in oil (flooded) or has severe carbon buildup.
If soaked in oil, wipe it dry with a cloth, or burn the electrode part with a lighter to remove the oil stains.
Place the spark plug cap on the spark plug, and let the metal part of the spark plug the metal parts of the engine (grounding).
Quickly press the start pedal, observe if there is a strong blue spark between the electrodes. With spark: indicates that the ignition system is normal, the problem may be in the fuel system (carburetor) or compression pressure.
· No spark or weak: The problem may be with the spark plug itself (try replacing it with a new one), the high-voltage coil, or the magneto.
·Q: There a lot of black carbon buildup on the spark plug, what's the matter?
· A: It usually indicates that the mixture is too rich (too much oil not enough gas). Possible reasons: · The air filter is too dirty, and the air intake is not smooth.
· Carburetor adjustment is incorrectneedle position is too high or main jet is too big). · Riding at low speed for a long time.
· Check if the oil pump stroke adjusted correctly to ensure that the oil supply is not excessive.
· Q: The spark plug electrode is white or burnt, what's the matter?
· A: indicates that the mixture is too lean (too little oil, too much gas) or the engine is overheating. · Check if the carburetor is clogged.
· Check if there is any air leakage in the intake manifold, etc.
· Confirm that the correct fuel and oil grades are being used.
For your YPW50 spark plug, remember these points:
- Preferred model: BPR6ES
- Maintenance: Regularly check and clean the spark plug, replace it in time if the electrode is worn out seriously or the gap is too large.
- Troubleshooting: When encountering starting problems, first check if the spark has spark.


|
Product model |
Material |
Product size |
Installation torque |
Applicable vehicle models |
|
MCR7HSA 702 |
Nickel alloy |
Thread length:12.5mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
70cc/90cc/100cc/110cc |
|
MCR7HIX 802 |
Single iridium |
Thread length:12.5mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
70cc/90cc/100cc/110cc |
|
IICR7HSA 902 |
Double iridium |
Thread length:12.5mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
70cc/90cc/100cc/110cc |
|
MDR8EA 703 |
Nickel alloy |
Thread length:19mm Thread diameter:12mm Wrench size:18mm |
15-20N·m |
125cc/250cc/300cc |
|
IIDR8EA 903 |
Double iridium |
Thread length:19mm Thread diameter:12mm Wrench size:18mm |
15-20N·m |
125cc/250cc/300cc |
|
MDPR8EA-9 704 |
Nickel alloy |
Thread length:19mm Thread diameter:12mm Wrench size:18mm |
15-20N·m |
125cc/250cc/300cc |
|
MDPR8EIX-9 804 |
Thread diameter |
Thread diameter |
15-20N·m |
125cc/250cc/300cc |
|
IIDPR8EA 904 |
Double iridium |
Thread length:19mm Thread diameter:12mm Wrench size:18mm |
15-20N·m |
125cc/250cc/300cc |
|
MCR8E 705 |
Nickel alloy |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
New Dazhou Honda SDH150/ Suzuki UC125 |
|
MCR8EIX 805 |
Single iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
New Dazhou Honda SDH150/ Suzuki UC125 |
|
IICR8E 905 |
Double iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
New Dazhou Honda SDH150/ Suzuki UC125 |
|
MCPR8EIX-9 806 |
Single iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
Xindazhou Honda CBX150/ Xindazhou Little Warrior SDH125 |
|
IICPR8EA-9 906 |
Double iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
Xindazhou Honda CBX150/ Xindazhou Little Warrior SDH125 |
|
MCR9EIX 807 |
Single iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
HONDA CBR series /VTR series YAMAHA FZR/XJR/YZF/FJR |
|
SIICR9E 907 |
Double iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
HONDA CBR series /VTR series YAMAHA FZR/XJR/YZF/FJR |
|
IIER9EHS 912 |
Double iridium |
Thread length:19mm Thread diameter:8mm Wrench size:13mm |
8-10N·m |
Honda VFR400/Zongshen TC380 |
|
MCR9EHS 708 |
Nickel alloy |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
Honda VFR400/Zongshen TC380 Honda VFR400/Zongshen TC380 |
|
MCR9EHIX-9 808 |
Single iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
Honda VFR400/Zongshen TC380 |
|
IICR9EHIX-9 908 |
Double iridium |
Thread length:19mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
Honda CBR250/VTR250 |
|
MILMAR8A9 809 |
Single iridium |
Thread length:27mm Thread diameter:10mm Wrench size:14mm |
10-15N·m |
Yamaha MT-07 BMW K1600GT |
|
IILMAR8A9 909 |
Double iridium |
Thread length:27mm Thread diameter:10mm Wrench size:14mm |
10-15N·m |
Yamaha MT-07 BMW K1600GT |
|
SIILMAR9A9S 910 |
Double iridium |
Thread length:26.5mm Thread diameter:10mm Wrench size:14mm |
10-15N·m |
Honda KTM350 African Parallel Bars 1100L/ADV |
|
MSILMAR9A9S 810 |
Single iridium |
Thread length:26.5mm Thread diameter:10mm Wrench size:14mm |
10-15N·m |
Honda KTM350 African Parallel Bars 1100L/ADV |
|
IILKAR8A-9 911 |
Double iridium |
Thread length:26.5mm Thread diameter:12mm Wrench size:14mm |
15-20N·m |
KTM Duke 250/RC390 |
|
MILMAR9D-T 813 |
Single iridium |
Thread length:26.5mm Thread diameter:10mm Wrench size:14mm |
10-15N·m |
BMW Waterbird R1200GS HP41000 |
|
MLMDR10A-JS 714 |
Nickel alloy |
Thread length:26.5mm Thread diameter:10mm Wrench size:13.5mm |
10-15N·m |
Ducati V4 |
|
MA6TC 701 |
No resistance |
Thread length:12.5mm Thread diameter:10mm Wrench size:16mm |
10-15N·m |
70cc/90cc/100cc/110cc |
Hot Tags: yamaha pw50 spark plug, China yamaha pw50 spark plug manufacturers, suppliers, factory, motorcycle spark plugs, Copper Spark Plugs, Nickel Alloy Motorcycle Spark Plugs, Platinum Motorcycle Spark Plugs, Iridium Motorcycle Spark Plugs, Motorcraft Spark Plug

